A4000™ 4-Device IDE interface
 
Compatible with the Commodore Amiga 4000 Desktop or A4000T.
 
The standard Commodore Amiga 4000 is supplied with a single IDE connector as standard allowing only two IDE devices to be connected. This interface overcomes this factory limitation by providing two IDE connectors. Each IDE interface allows two devices so with this adapter a total of up to 4x IDE devices is possible.
 
Features 2x 40-pin IDE connectors (primary/secondary) and 1x 40-pin IDE connector to link to original Amiga motherboard IDE interface.
 
The 40-way (3.5") IDE cable to connect this adapter to the Amiga motherboard IDE connector can be optionally added below at various lengths.
 
Installation is straight forward. The socket marked "To Amiga" connects with an IDE cable to the motherboard's IDE header. The hard drive or optical drive IDE cables are then connected to the Port 0 (primary channel) or Port 1 (secondary channel).
 
To use the secondary port, third party software such as IDEFIX software package should be installed.
 
Hardware design (C) 2004-2020 AmigaKit Ltd. A4000 is a trade mark of AmigaKit Ltd.  
 
Don't Forget:
A1200/A600 4XIDE Buffered IDE Interface
A4000 Compact Flash CF IDE Back Plate Adapter
A4000 CF IDE Hard Drive 4GB