Connects to a SCSI interface card and permits access to a SD card as a fixed storage device.
Features a 25 pin (DB25 Male) SCSI connector. If you require 50-pin SCSI, we stock an optional 25-pin female to 50-pin male adapter (
click here)
Supplied with case.
5 volts is required which can be powered via the DB25 SCSI connector, or optional USB cable. This adapter draws a maximum of 2.35W (500mA). Requires SCSI host that supplies terminator power on pin 25 of the DB25 socket.
Also compatible with A590 SCSI hard disk controller and GVP a500-hd+ Impact II for the Amiga 500 when used with our adapter.
It is also compatible with C64 CMD HD-20 Hard disk controllers for C64 (aslong as you have Boot ROM V2.80 and use only 4GB) and appropriate gender adapters.
Read/Write speeds achievable to a maximum of 2.5Mb/sec (approximately). Supports asynchronous transfers only.
Version: 5.5
Adapter dimensions (with case): 68 x 55 x 18 mm
We also stock the higher performance
SCSI to SD Adapter (SCSI2SD) V6 (click here)
We also stock the
3.5" drive bay mounting bracket (click here)