The
ACA 500 is a new accelerator for the
Amiga 500 and Amiga 500+ computer ³
It offers faster performance, extra memory and Compact Flash card media slots which can be used for a bootable hard drive and Compact Flash media slot (
add optional CF card below)
It also features an A1200-style expansion connector which is compatible with some A1200 expansions (see below for details).
Product Features
![](images/bullet.jpg)
 68EC000/10 clocked at 14MHz, so will accelerate the Amiga 500's performance
![](images/bullet.jpg)
 2 MB RAM of available memory on board: 0.5MB can be allocated to MapROM function
![](images/bullet.jpg)
 External expansion which slots into side of A500 so there is no need to open the Amiga 500 case
![](images/bullet.jpg)
 1x Bootable Hard Drive Compact Flash card slot which is bootable and can read or write Amiga cards
![](images/bullet.jpg)
 1x Media Compact Flash slot which can read/write PC FAT formatted cards
![](images/bullet.jpg)
 Compatible with existing trapdoor RAM expansions (up to 1.8 MB)
![](images/bullet.jpg)
 Compatible with existing Chip Mem expansion upgrades
![](images/bullet.jpg)
 Custom expansion port for local hardware (14 MHz 16 bit, double Zorro speed)
![](images/bullet.jpg)
 Clock port for compatible hardware expansions such as Silversurfer or
Catweasel Mk2 Anniversary Edition
![](images/bullet.jpg)
 Optionally expandable by adding a new
ACA 1220 ¹ or ACA 1232 accelerator card
![](images/bullet.jpg)
 Licensed Kickstart ROM images 1.3 and 3.1 installed in onboard Flash ROM
![](images/bullet.jpg)
 FAT95 file system installed in internal Flash ROM
![](images/bullet.jpg)
 Compatible with
WHDLoad game software
![](images/bullet.jpg)
Â
EasyADF software optionally available pre-installed on CF hard drive (
add optional CF card with EasyADF below)
![](images/bullet.jpg)
 Firmware flash recovery floppy disk available (
add optional Recovery floppy disk below)
¹ ACA 1220 accelerators sold before September 5th 2013 will require a firmware upgrade by manufacturer to work with ACA 500. ² For legal reasons, we cannot supply Amiga Operating System pre-installed. You will require your own Workbench disk images. ³ motherboard revision 5 or higher required. At this time, there are some unconfirmed reports of NTSC motherboards not working with ACA 500.
Don't Forget:
![](images/bullet.jpg)
Â
Amiga 500 motherboard